Product Information

Ever tried to change /adjust your own Vitara (or Grand Vitara) bearings? Bit of a hard job to get at them without the tool the Suzuki garages use? So here's a tool I designed to do the same job, and avaliable to the home mechanic, at a cheaper price that the Suzuki one, if you can get hold of one...

The tool has a 19mm hex machined into the back of it -

... which means you can use a torque wrench (preferable), a breaker bar, or even a socket and ratchet to tighten and loosen the retaining ring.

Take the free wheeling hub / hub cap off and you'll be faced with this -

Undo the locking ring with a small crosshead screwdriver (and a lot of cursing!)

Pop the bearing tool onto a torque wrench (preferable), breaker bar, or socket and ratchet...

And then slide it into the bearing retaing ring and crank on that handle, and you;ll soon have that bearing retaining ring off! ;)

So you can put that hammer and chisel away! -

Note these are now blackened rather than zinced, as per main product photograph.

(Based on 4 Reviews)

Price: £42.00 £35.70

Brand/Manufacturer: Bits4Vits

Fits Vehicle(s): Suzuki Vitara, X90, Grand Vitara

Also Requires: (Torque Wrench / Breaker Bar)

Item Priced Per: EACH

Construction: CNC Machined Steel

Finish/Colour: Blackened

Manufactured: Wales, UK

• Ask a question about this product
• Read customer reviews
• Write review / comment