Product Information

A pair of SuperPro Polyurethane Bushes to replace the rubber bushes in the rear mountings of the front wishbones. 

These have an offset hole in them and allow caster and camber adjustment by rotating the sleeve in the poly bush.

This will also push the front tyres slightly out and forward so that they clear the bulkhead and chassis...

DIAGRAM to try and explain how these work! - excuse my drawing "skills"! - on the left a standard wishbone sat straight in the chassis mounts (grey). On the right, you can see I've rotated the wishbone by 3 degrees in the drawing software package, and as you can see by the big black "tyre", it has moved away from the red chassis line and the red firewall (back of the arches) red line as well, as it rotates the wishbone slightly out and forward using the bush's offset centre inset sleeve... (depicted by the orange square)

On my own Vitara "Stealth", I have done a similar mod - "the Hagen Widening Mod", but more so, which involves redrilling the rear wishbone mounting hole which forces the tyre out even more, and in the picture below you can see my Vitara with 31"x10.5" tyres on with no arch modifications! - no hammering, no cutting!

Again, from my Hagen Widening Mod so more extreme than these bushes will do, but still good and illustrative - you can se how much the wishbone has moved by the relationship to the bump stop cone to the spring seats position - the rubber cone normally lands in the middle of the spring seat.

Be the first to review this product!

Price: £84.98 £72.24

Brand/Manufacturer: SuperPro

Fits Vehicle(s): Suzuki Vitara, X90

Item Priced Per: Pair

Construction: Automotive Polyurethane

Finish/Colour: Blue

Manufactured: in Australia

Supplier's Code: SPF0920AK

• Ask a question about this product
• Write review / comment