Product Information

A set of Polyurethane Bushes to replace the rubber bushes in the mountings of the front wishbones, which will correct the castor on lifted vehicles, and also offset the tyres off the chassis rails and bulkhead.

The rear bushes have an enlarged centre sleeve to allow a 7mm offset hole machined in them which allows caster and camber adjustment by rotating the sleeve in the poly bush. 

DIAGRAM to try and explain how these work! - excuse my drawing "skills"! - on the left a standard wishbone sat straight in the chassis mounts (grey). On the right, you can see I've rotated the wishbone by 3 degrees in the drawing software package, and as you can see by the big black "tyre", it has moved away from the red chassis line and the red firewall (back of the arches) red line as well, as it rotates the wishbone slightly out and forward using the bush's offset centre inset sleeve... (depicted by the orange square)

On my own Vitara "Stealth", I have done a similar mod - "the Hagen Widening Mod", but more so, which involves redrilling the rear wishbone mounting hole which forces the tyre out even more, and in the picture below you can see my Vitara with 31"x10.5" tyres on with no arch modifications! - no hammering, no cutting!

Again, from my Hagen Widening Mod so more extreme than these bushes will do, but still good and illustrative - you can see how much the wishbone has moved by the relationship to the bump stop cone to the spring seats position - the rubber cone normally lands in the middle of the spring seat.

Be the first to review this product!

Price: £84.00

Brand/Manufacturer: Flo-Flex

Fits Vehicle(s): Suzuki Vitara, X90

Item Priced Per: Set, as pictured

Construction: Automotive Polyurethane

Finish/Colour: Orange

Manufactured: in UK

• Ask a question about this product
• Write review / comment

In Stock

Recommended Accessories   Front Driveshaft Spacer - 8mm (£24.00)

Quantity: Add to Basket