Spring Spacer Single 37mm for Levelling / "Jimny Lean"

  • Click to enlarge
  • Click to enlarge
Spring Spacer Single 37mm for Levelling / "Jimny Lean"

Tap for gallery


Product Information

Spring Spacers - Single for Levelling / Fix the "Jimny Lean"

This 1.5" / 37mm Spring Spacer is used for levelling up, especially for fixing the "Jimny Lean". It simply replaces the original spring seat in the chassis cup of the lowest corner of the vehicle to level it back up. See in the additional photo how they are shaped to match the coils of original and after-market springs!

Also available - as a set of four for a suspension lift, and in pairs for levelling up / sagged springs / heavy winches and / or bumpers.


Made in the UK from black automotive grade polyurethane. 

Fitment -  Jack up under the chassis and place an axle stand under the chassis rail, then jack up under the axle and remove the wheel and tyre, undo the bolt(s) on the shock absorber so that the axle can be lowered and the spring can then be removed (I sometimes use the original scissor jack to push the axle down if necessary), remove the spring seat from the chassis cup and place the spring spacer in it's place. Then refit the spring and the shock.

Product Code SpSp1
Manufacturer Floflex
Condition New
Weight 0.350kg

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Verify you are a human

Please enter a valid email address.
This field is required.

eCommerce by CubeCart