Spring Spacers 37mm set of 4 for Suspension Lift

  • Click to enlarge
  • Click to enlarge
Spring Spacers 37mm set of 4 for Suspension Lift

Tap for gallery

£90.00


Product Information
Specification

Spring Spacers - Set of 4 for Suspension Lift

These 1.5" / 37mm Spring Spacers will give your Suzuki an easy to fit lift that won't upset your suspension and steering geometry too much. They simply replace the original spring seat in the chassis cups and give 1.5" / 37mm of lift as a result. See in the additional photo how they are shaped to match the coils of original and after-market springs!

If you're looking for more than 1.5" of lift I would recommend either lift springs or a combination of lift springs and spacers, I myself wouldn't fit a spring spacer more than 1.5" - On a Jimny you would start to have castor issues (vague steering and a lack of self-centering) and on a Vitara / GV you would have lift at the front, but you wouldn't have any useable articulation.

Also available - in pairs for levelling up / sagged springs / heavy winches and / or bumpers, and in singles for fixing the notorious "Jimny Lean".

 

Made in the UK from black automotive grade polyurethane. 


Fitment -  Jack up under the chassis and place an axle stand under the chassis rail, then jack up under the axle and remove the wheel and tyre, undo the bolt(s) on the shock absorber so that the axle can be lowered and the spring can then be removed (I sometimes use the original scissor jack to push the axle down if necessary), remove the spring seat from the chassis cup and place the spring spacer in it's place. Then refit the spring and the shock, repeat for all the other corners... Stand back and admire your work ;) 

Product Code SpSp4
Manufacturer Floflex
Condition New
Weight 1.350kg

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Verify you are a human

Please enter a valid email address.
This field is required.
Top

eCommerce by CubeCart